FluoSolv®
FluoSolv® NPX Non-PFAS Vapor Degreasing & Cold Cleaning Solvent
No reviews yet
Write a Review
Write a Review
FluoSolv®
FluoSolv® NPX Non-PFAS Vapor Degreasing & Cold Cleaning Solvent
High Cleaning Power Removes heavy oils, greases, fluxes, and lubricants Broad Material Compatibility Compatible with metals, ceramics & many engineered materials Non-PFAS Formulation Contains no PFAS under applic…
$100.00
Product Details
Heavy-Duty Vapor Degreasing
Critical Precision Cleaning
Heavy Grease & Lubricant Removal
Electronics & Component Cleaning
Aerospace & Industrial Components
Cold & Spray Cleaning
High Cleaning Power
Removes heavy oils, greases, fluxes, and lubricants
Broad Material Compatibility
Compatible with metals, ceramics & many engineered materials
Non-PFAS Formulation
Contains no PFAS under applicable EPA reporting definition
Nonflammable
No flash point
Reclaimable & Reusable
Stable composition enables efficient solvent recovery
About FluoSolv® NPX
FluoSolv® NPX is a high-performance, non-PFAS solvent blend engineered by NuGenTec for heavy-duty vapor degreasing, cold cleaning, and precision-cleaning applications. Its proprietary combination of fluorinated solvents and trans-1,2-dichloroethylene (t-DCE) provides exceptional solvency, high density, low surface tension, and low viscosity for rapid removal of heavy greases, oils, lubricants, particulates, and other difficult manufacturing soils.
With a Kauri-Butanol (KB) value of 103, FluoSolv® NPX delivers aggressive cleaning performance while providing low Global Warming Potential (GWP), zero Ozone Depletion Potential (ODP), no open- or closed-cup flash point, and broad material compatibility. FluoSolv® NPX does not contain PFAS under the EPA Reporting and Recordkeeping Requirements for Perfluoroalkyl and Polyfluoroalkyl Substances final rule dated September 28, 2023, providing a high-performance option for applications seeking to transition away from PFAS-containing cleaning technologies.
Contact NuGenTec technical experts for assistance evaluating FluoSolv® NPX for your heavy-duty vapor-degreasing, cold-cleaning, or precision-cleaning process.
Typical Applications
Heavy-Duty Vapor Degreasing Critical Precision Cleaning Heavy Grease & Lubricant Removal Electronics & Component Cleaning Aerospace & Industrial Components Cold & Spray Cleaning
High Cleaning Power
Removes heavy oils, greases, fluxes, and lubricants
Broad Material Compatibility
Compatible with metals, ceramics & many engineered materials
Non-PFAS Formulation
Contains no PFAS under applicable EPA reporting definition
Nonflammable
No flash point
Reclaimable & Reusable
Stable composition enables efficient solvent recovery
Typical Properties
| Property | FluoSolv® NPX |
|---|---|
| Boiling Point, °C (°F) | 47.0 (116.6) |
| Density at 25°C (77°F), g/ml (lb/gal) | 1.248 (10.60) |
| Flash Point, °C (°F) | None to Boiling Point |
| Surface Tension at 25°C (77°F), dynes/cm | 21 |
| Viscosity at 25°C (77°F), cPs | 0.43 |
| Vapor Pressure at 25°C (77°F), kPa | 44.5 |
| Heat of Vaporization at B.P., kJ/kg | 285 |
| Global Warming Potential (GWP), 100-year ITH | <1 |
| Ozone Depletion Potential (ODP), CFC-11 = 1.0 | 0 |
| Volatile Organic Compounds (VOC), g/L | 1186 |
| Kauri-Butanol Value (KB Value) | 103 |
| Acceptable Exposure Limit (AEL), ppm | 200 |
Process Parameters
| Parameter | Typical Operating Range |
|---|---|
| Boil Sump Temperature, °C (°F) | 47.0 (116.6) |
| Primary Cooling Coil Temperature, °C (°F) | 4.0–10.0 (39.2–50.0) |
| Secondary (Sub-Zero) Coil Temperature, °C (°F) | −20.0 to −30.0 (−4.0 to −22.0) |
| Immersion Sump Temperature, °C (°F) | 32.0–42.0 (89.6–107.6) |
| Ultrasonic Frequency, kHz | 20.0–40.0 |
| Dwell Time in Vapor | 30 sec–2 min, or until condensation ceases |
| Immersion Time | 1–8 min; adjust for soil, geometry, and cleanliness requirement |
| Hoist Speed, m/min (ft/min) | ≤3.4 (11.2); slower withdrawal may reduce solvent carryout |
| Freeboard Ratio, minimum | ≥0.75 (1.00–1.25); preferred for improved vapor containment |
Material Compatibility
| Material | Compatibility |
|---|---|
| Aluminum | Compatible |
| Copper | Compatible |
| Stainless Steel | Compatible |
| Titanium | Compatible |
| Brass | Compatible |
| Tungsten | Compatible |
| Neoprene | Compatible |
| Butyl Rubber | Test for Compatibility |
| EPDM | Compatible |
| KYNAR (PVDF) | Compatible |
| Viton A&B | Test for Compatibility |
| Kalrez | Test for Compatibility |
| HDPE | Compatible |
| PTFE | Compatible |
| Nylon | Compatible |
| PVC | Test for Compatibility |
| Epoxy | Compatible |
| Phenolic | Test for Compatibility |
| ABS | Test for Compatibility |
| Acrylic | Test for Compatibility |
| Polycarbonate | Test for Compatibility |
| Other Metals, Elastomers, Plastics | Test for Compatibility |
Available Sizes
| Package Size | Net Weight |
|---|---|
| 55-gallon lined metal drums | 550 lbs |
| 5-gallon lined pails | 52.5 lbs |
Need Help Selecting the Right Product?
Our technical team is here to help you find the best solution.
Contact an Expert
Related Products
FluoSolv®
FluoSolv® 71DE Vapor Degreasing & Precision Cleaning Solvent
Medium-DutyCleaning Po
$100.00
