FluoSolv®
FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Solvent
No reviews yet
Write a Review
Write a Review
FluoSolv®
FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Solvent
Precision Cleaning Removes particulates, fingerprints & light oils Broad Material Compatibility Compatible with metals, ceramics & many engineered materials Non-Chlorinated Contains no t-DCE or chlorinated so…
$100.00
Product Details
Vapor Degreasing
Precision Metal Cleaning
Electronics Defluxing
Light Oil & Residue Removal
Particulate & Fingerprint Removal
Critical Component Cleaning
Precision Cleaning
Removes particulates, fingerprints & light oils
Broad Material Compatibility
Compatible with metals, ceramics & many engineered materials
Non-Chlorinated
Contains no t-DCE or chlorinated solvents
Nonflammable
No flash point
Reclaimable & Reusable
Stable azeotropic composition enables efficient solvent recovery
About FluoSolv® NC-786
FluoSolv® NC-786 is a high-performance, non-chlorinated azeotropic solvent blend engineered by NuGenTec for precision vapor degreasing, defluxing, and critical-cleaning applications. Its proprietary combination of fluorinated fluids, cyclopentane, and isopropyl alcohol (IPA) provides an effective balance of solvency, high density, low surface tension, and low viscosity for rapid removal of particulates, fingerprints, light oils, flux residues, and other manufacturing soils.
Unlike many conventional high-performance vapor-degreasing solvents, FluoSolv® NC-786 contains no trans-1,2-dichloroethylene (t-DCE) or other chlorinated solvents, making it particularly well suited for applications and geographic locations where chlorinated-solvent use is restricted or undesirable. FluoSolv® NC-786 is a drop-in replacement for Asahi AK-225 and Vertrel® MCA and provides low Global Warming Potential (GWP), zero Ozone Depletion Potential (ODP), high worker exposure limits, and excellent chemical stability.
Contact NuGenTec technical experts for assistance evaluating FluoSolv® NC-786 as a replacement for AK-225, Vertrel® MCA, t-DCE-containing blends, or other precision vapor-degreasing and defluxing solvents in your cleaning process.
Typical Applications
Vapor Degreasing Precision Metal Cleaning Electronics Defluxing Light Oil & Residue Removal Particulate & Fingerprint Removal Critical Component Cleaning
Precision Cleaning
Removes particulates, fingerprints & light oils
Broad Material Compatibility
Compatible with metals, ceramics & many engineered materials
Non-Chlorinated
Contains no t-DCE or chlorinated solvents
Nonflammable
No flash point
Reclaimable & Reusable
Stable azeotropic composition enables efficient solvent recovery
Typical Properties
| Property | FluoSolv® NC-786 |
|---|---|
| Boiling Point, °C (°F) | 39.0 (102.2) |
| Density at 25°C (77°F), g/ml (lb/gal) | 1.154 (9.63) |
| Flash Point, °C (°F) | None to Boiling Point |
| Surface Tension at 25°C (77°F), dynes/cm | 18.2 |
| Viscosity at 25°C (77°F), cPs | 0.59 |
| Vapor Pressure at 25°C (77°F), kPa | 68.5 |
| Heat of Vaporization at B.P., kJ/kg | 240 |
| Global Warming Potential (GWP), 100-year ITH | 406 |
| Ozone Depletion Potential (ODP), CFC-11 = 1.0 | 0 |
| Volatile Organic Compounds (VOC), g/L | 323 |
| Kauri-Butanol Value (KB Value) | 47.5 |
| Acceptable Exposure Limit (AEL), ppm | 400 |
Process Parameters
| Parameter | Typical Operating Range |
|---|---|
| Boil Sump Temperature, °C (°F) | 39.0 (102.2) |
| Primary Cooling Coil Temperature, °C (°F) | 4.0–10.0 (39.2–50.0) |
| Secondary (Sub-Zero) Coil Temperature, °C (°F) | −20.0 to −30.0 (−4.0 to −22.0) |
| Immersion Sump Temperature, °C (°F) | 24.0–34.0 (75.2–93.2) |
| Ultrasonic Frequency, kHz | 20.0–40.0 |
| Dwell Time in Vapor | 30 sec–2 min, or until condensation ceases |
| Immersion Time | 1–8 min; adjust for soil, geometry, and cleanliness requirement |
| Hoist Speed, m/min (ft/min) | ≤3.4 (11.2); slower withdrawal may reduce solvent carryout |
| Freeboard Ratio, minimum | ≥0.75 (1.00–1.25); preferred for improved vapor containment |
Material Compatibility
| Material | Compatibility |
|---|---|
| Aluminum | Compatible |
| Copper | Compatible |
| Stainless Steel | Compatible |
| Titanium | Compatible |
| Brass | Compatible |
| Tungsten | Compatible |
| Neoprene | Compatible |
| Butyl Rubber | Compatible |
| EPDM | Compatible |
| KYNAR (PVDF) | Compatible |
| Viton A&B | Test for Compatibility |
| Kalrez | Test for Compatibility |
| HDPE | Compatible |
| PTFE | Compatible |
| Nylon | Compatible |
| PVC | Compatible |
| Epoxy | Compatible |
| Phenolic | Compatible |
| ABS | Test for Compatibility |
| Acrylic | Test for Compatibility |
| Polycarbonate | Test for Compatibility |
| Other Metals, Elastomers, Plastics | Test for Compatibility |
Available Sizes
| Package Size | Net Weight |
|---|---|
| 55-gallon lined metal drums | 450 lbs |
| 5-gallon lined pails | 45 lbs |
Need Help Selecting the Right Product?
Our technical team is here to help you find the best solution.
Contact an Expert
Related Products
FluoSolv®
FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Fluid
Specifications: FluoSolv® NC-786 Composition (Typical) Fluorinated Fluid Mixture > 85 wt% Cyclopentane Proprietary IPA Proprietary Water < 100 ppm Non-volatile residue <100 ppm (drums) , <200 ppm...
$100.00
FluoSolv®
FluoSolv® NPX Non-PFAS Vapor Degreasing & Cold Cleaning Solvent
High Cleaning Power<
$100.00