New
FluoSolv® 72DA Vapor Degreasing & Defluxing Solvent
FluoSolv® 72DA Vapor Degreasing & Defluxing Solvent

FluoSolv®

FluoSolv® 72DA Vapor Degreasing & Defluxing Solvent

No reviews yet Write a Review

High CleaningPower Removes flux residues, oils,greases, waxes & difficult soils Broad MaterialCompatibility Compatible with metals & a widevariety of engineered materials Ionic SoilRemoval Enhanced removal of…

$100.00
Request a Quote
Product Details

High Cleaning
Power

Removes flux residues, oils,
greases, waxes & difficult soils

Broad Material
Compatibility

Compatible with metals & a wide
variety of engineered materials

Ionic Soil
Removal

Enhanced removal of polar
& ionic contaminants

Nonflammable

No flash point

Azeotropic
Stability

Maintains consistent composition
during boiling

About FluoSolv® 72DA

FluoSolv® 72DA is a high-performance azeotropic solvent blend engineered as a direct, drop-in replacement for 3M™ Novec™ 72DA Engineered Fluid. Formulated from methyl nonafluorobutyl ether, ethyl nonafluorobutyl ether, trans-1,2-dichloroethylene (t-DCE), and isopropyl alcohol (IPA), FluoSolv® 72DA combines high solvency, low surface tension, nonflammability, and stable composition during evaporation and boiling for demanding vapor-degreasing and immersion-cleaning processes.

Designed for medium- to heavy-duty precision cleaning and defluxing, FluoSolv® 72DA effectively removes rosin solder flux residues, oils, greases, waxes, and other difficult organic soils. The IPA component enhances removal of polar and ionic contaminants, making FluoSolv® 72DA particularly well suited for electronics and other critical-cleaning applications requiring both organic and ionic residue removal.

Contact NuGenTec technical experts for assistance evaluating FluoSolv® 72DA as a replacement for 3M™ Novec™ 72DA in your cleaning or defluxing process.

Typical Applications

Vapor Degreasing
Heavy-Duty Precision Cleaning
Electronics Defluxing
Aerospace & Defense Components
Ionic Contaminant Removal
Critical Component Cleaning

High Cleaning
Power

Removes flux residues, oils,
greases, waxes & difficult soils

Broad Material
Compatibility

Compatible with metals & a wide
variety of engineered materials

Ionic Soil
Removal

Enhanced removal of polar
& ionic contaminants

Nonflammable

No flash point

Azeotropic
Stability

Maintains consistent composition
during boiling

Typical Properties

Property FluoSolv® 72DA
Boiling Point, °C (°F) 44.0 (111.2)
Density at 25°C (77°F), g/mls (lbs/gal) 1.270 (10.60)
Flash Point, °C (°F) None to Boiling Point
Surface Tension at 25°C (77°F), dynes/cm 18
Viscosity at 25°C (77°F), cPs 0.40
Vapor Pressure at 25°C (77°F), kPa 48
Heat of Vaporization at B.P. (kJ/kg) 218
Global Warming Potential (GWP), /100 year ITH 43
Ozone Depletion Potential (ODP), CFC-11 = 1.0 0
Volatile Organic Compounds (VOC), g/L 889
Kauri-Butanol Value (KB Value) 58
Acceptable Exposure Limit (AEL), ppm 200

Process Parameters

Parameter Typical Operating Range
Boil Sump Temperature, °C (°F) 44.0 (111.2)
Primary Cooling Coil Temperature, °C (°F) 4.0–10.0 (39.2–50.0)
Secondary (Sub-Zero) Coil Temperature, °C (°F) −20.0 to −30.0 (−4.0 to −22.0)
Immersion Sump Temperature, °C (°F) 29.0–39.0 (84.2–102.2)
Ultrasonic Frequency, kHz 20.0–40.0
Dwell Time in Vapor 30 sec–2 min, or until condensation ceases
Immersion Time 1–8 min; adjust for soil, geometry, and cleanliness requirement
Hoist Speed, m/min (ft/min) ≤3.4 (11.2); slower withdrawal may reduce solvent carryout
Freeboard Ratio, minimum ≥0.75 (1.00–1.25); preferred for improved vapor containment

Material Compatibility

Material Compatibility
Aluminum Compatible
Copper Compatible
Stainless Steel Compatible
Titanium Compatible
Brass Compatible
Tungsten Compatible
Neoprene Compatible
Butyl Rubber Compatible
EPDM Compatible
KYNAR (PVDF) Compatible
Viton A&B Test for Compatibility
Kalrez Test for Compatibility
HDPE Compatible
PTFE Compatible
Nylon Compatible
PVC Compatible
Epoxy Compatible
Phenolic Compatible
ABS Test for Compatibility
Acrylic Test for Compatibility
Polycarbonate Test for Compatibility
Other Metals, Elastomers, Plastics Test for Compatibility

Available Sizes

Package Size (Volume) Package Size (Net Weight)
55-gallon lined metal drums 550 lbs
5-gallon lined pails 52.5 lbs
Request a Quote Request a Sample Contact Technical Expert Testing Support Request SDS Request TDS

Need Help Selecting
the Right Product?

Our technical team is here to
help you find the best solution.

Contact an Expert

Not Sure If FluoSolv® 72DA
Is Right for Your Application?

Contact an Expert
Shipping & Returns
Icon Loading