FluoSolv®
FluoSolv® HT-G20 High-Performance Vapor Degreasing Solvent
No reviews yet
Write a Review
Write a Review
FluoSolv®
FluoSolv® HT-G20 High-Performance Vapor Degreasing Solvent
High Cleaning Power Removes oils, greases, fluxes, and particulates Materials Compatible Safe on a variety of metals, plastics, and elastomers Low Global Warming Potential Environmentally responsible fluorinated solv…
$100.00
Product Details
Vapor Degreasing
Precision Cleaning of Metal Components
Electronics Manufacturing
Medical Device Cleaning
Critical Component Cleaning
Optical & High-Purity Parts Cleaning
High Cleaning Power
Removes oils, greases, fluxes, and particulates
Materials Compatible
Safe on a variety of metals, plastics, and elastomers
Low Global Warming Potential
Environmentally responsible fluorinated solvent
Long Bath Life
Resists degradation for consistent performance
Precision Cleaning
Ideal for critical applications
About FluoSolv® HT-G20
FluoSolv® HT-G20 is a high-performance, nonflammable fluorinated solvent engineered for vapor degreasing and precision-cleaning applications. Its optimized solvent chemistry combines high cleaning power, low surface tension, rapid drying, and excellent materials compatibility for effective removal of oils, greases, machining fluids, flux residues, particulates, and other difficult contaminants from precision components.
FluoSolv® HT-G20 is designed for use in modern vapor-degreasing, immersion, ultrasonic, and cold-cleaning processes across electronics, industrial manufacturing, medical device, optical, and other critical-cleaning applications. Its stable composition provides consistent cleaning performance and long bath life while offering a qualified non-PFAS, low-GWP alternative to legacy fluorinated and ozone-depleting cleaning solvents.
Contact NuGenTec technical experts for assistance evaluating FluoSolv® HT-G20 for your vapor-degreasing, cold-cleaning, or precision-cleaning process.
Typical Applications
Vapor Degreasing Precision Cleaning of Metal Components Electronics Manufacturing Medical Device Cleaning Critical Component Cleaning Optical & High-Purity Parts Cleaning
High Cleaning Power
Removes oils, greases, fluxes, and particulates
Materials Compatible
Safe on a variety of metals, plastics, and elastomers
Low Global Warming Potential
Environmentally responsible fluorinated solvent
Long Bath Life
Resists degradation for consistent performance
Precision Cleaning
Ideal for critical applications
Typical Properties
| Property | FluoSolv® HT-G20 |
|---|---|
| Boiling Point, °C (°F) | 47.0 (116.6) |
| Density at 25°C (77°F), g/ml (lb/gal) | 1.270 (10.60) |
| Flash Point, °C (°F) | None to Boiling Point |
| Surface Tension at 25°C (77°F), dynes/cm | 15.9 |
| Viscosity at 25°C (77°F), cPs | 0.41 |
| Vapor Pressure at 25°C (77°F), kPa | 44.2 |
| Heat of Vaporization at B.P., kJ/kg | 282 |
| Global Warming Potential (GWP), 100-year ITH | <15 |
| Ozone Depletion Potential (ODP), CFC-11 = 1.0 | 0 |
| Volatile Organic Compounds (VOC), g/L | 1207 |
| Kauri-Butanol Value (KB Value) | 111.2 |
| Acceptable Exposure Limit (AEL), ppm | 200 |
Process Parameters
| Parameter | Typical Operating Range |
|---|---|
| Boil Sump Temperature, °C (°F) | 47.0 (116.6) |
| Primary Cooling Coil Temperature, °C (°F) | 4.0–10.0 (39.2–50.0) |
| Secondary (Sub-Zero) Coil Temperature, °C (°F) | −20.0 to −30.0 (−4.0 to −22.0) |
| Immersion Sump Temperature, °C (°F) | 32.0–42.0 (89.6–107.6) |
| Ultrasonic Frequency, kHz | 20.0–40.0 |
| Dwell Time in Vapor | 30 sec–2 min, or until condensation ceases |
| Immersion Time | 1–8 min; adjust for soil, geometry, and cleanliness requirement |
| Hoist Speed, m/min (ft/min) | ≤3.4 (11.2); slower withdrawal may reduce solvent carryout |
| Freeboard Ratio, minimum | ≥0.75 (1.00–1.25); preferred for improved vapor containment |
Material Compatibility
| Material | Compatibility |
|---|---|
| Aluminum | Compatible |
| Copper | Compatible |
| Stainless Steel | Compatible |
| Titanium | Compatible |
| Brass | Compatible |
| Tungsten | Compatible |
| Neoprene | Compatible |
| Butyl Rubber | Compatible |
| EPDM | Compatible |
| KYNAR (PVDF) | Compatible |
| Viton A&B | Test for Compatibility |
| Kalrez | Test for Compatibility |
| HDPE | Compatible |
| PTFE | Compatible |
| Nylon | Compatible |
| PVC | Compatible |
| Epoxy | Compatible |
| Phenolic | Compatible |
| ABS | Compatible |
| Acrylic | Test for Compatibility |
| Polycarbonate | Test for Compatibility |
| Other Metals, Elastomers, Plastics | Test for Compatibility |
Available Sizes
| Package Size | Net Weight |
|---|---|
| 55-gallon lined metal drums | 550 lbs |
| 5-gallon lined pails | 52.5 lbs |
Need Help Selecting the Right Product?
Our technical team is here to help you find the best solution.
Contact an Expert
Related Products
