FluoSolv®
FluoSolv® CAS Zero-VOC Vapor Degreasing Solvent
No reviews yet
Write a Review
Write a Review
FluoSolv®
FluoSolv® CAS Zero-VOC Vapor Degreasing Solvent
Maximum CleaningPower Removes particulates, fingerprints& light oils and greases MaterialsCompatible Compatible with metals, ceramics& many engineered materials Zero VOC SCAQMD-certified Clean Air Solventfor …
$100.00
Product Details
Maximum Cleaning
Materials
Chemically
Vapor Degreasing
Precision Metal Cleaning
Electronics Defluxing
Heavy Oil & Grease Removal
Aerospace & Defense Components
Critical Component Cleaning
Maximum Cleaning
Materials
Chemically
Need Help Selecting
Maximum Cleaning
Power
Removes particulates, fingerprints
& light oils and greases
Materials
Compatible
Compatible with metals, ceramics
& many engineered materials
Zero VOC
SCAQMD-certified Clean Air Solvent
for California applications
Nonflammable
No flash point
Chemically
Stable
Stable chemistry designed
to resist acid formation
About FluoSolv® CAS
FluoSolv® CAS is a proprietary zero-VOC vapor-degreasing solvent engineered by NuGenTec for precision-cleaning applications requiring effective cleaning performance with reduced VOC emissions. Unlike many conventional vapor-degreasing solvents, FluoSolv® CAS contains no trans-1,2-dichloroethylene (t-DCE), alcohol, or hydrocarbons and has been certified by the South Coast Air Quality Management District (SCAQMD) as a Clean Air Solvent.
FluoSolv® CAS combines low surface tension, good solvency, nonflammability, chemical stability, and broad material compatibility for removal of particulates, fingerprints, light oils, greases, and other light manufacturing soils. Its zero-VOC status makes it particularly well suited for vapor-degreasing operations in California and other applications where VOC emissions and air-quality requirements are important process considerations.
Contact NuGenTec technical experts for assistance evaluating FluoSolv® CAS for your zero-VOC vapor-degreasing or precision-cleaning process.
Typical Applications
Vapor Degreasing Precision Metal Cleaning Electronics Defluxing Heavy Oil & Grease Removal Aerospace & Defense Components Critical Component Cleaning
Maximum Cleaning
Power
Removes particulates, fingerprints
& light oils and greases
Materials
Compatible
Compatible with metals, ceramics
& many engineered materials
Zero VOC
SCAQMD-certified Clean Air Solvent
for California applications
Nonflammable
No flash point
Chemically
Stable
Stable chemistry designed
to resist acid formation
Typical Properties
| Property | FluoSolv® CAS |
|---|---|
| Boiling Point, °C (°F) | 58.0 (136.4) |
| Density at 25°C (77°F), g/mls (lbs/gal) | 1.329 (11.09) |
| Flash Point, °C (°F) | None to Boiling Point |
| Surface Tension at 25°C (77°F), dynes/cm | 18.1 |
| Viscosity at 25°C (77°F), cPs | 0.60 |
| Vapor Pressure at 25°C (77°F), kPa | 31 |
| Heat of Vaporization at B.P. (kJ/kg) | 208 |
| Global Warming Potential (GWP), /100 year ITH | 464 |
| Ozone Depletion Potential (ODP), CFC-11 = 1.0 | 0 |
| Volatile Organic Compounds (VOC), g/L | 0 |
| Kauri-Butanol Value (KB Value) | 45 |
| Acceptable Exposure Limit (AEL), ppm | 200 |
Process Parameters
| Parameter | Typical Operating Range |
|---|---|
| Boil Sump Temperature, °C (°F) | 58.0 (136.4) |
| Primary Cooling Coil Temperature, °C (°F) | 4.0–10.0 (39.2–50.0) |
| Secondary (Sub-Zero) Coil Temperature, °C (°F) | −20.0 to −30.0 (−4.0 to −22.0) |
| Immersion Sump Temperature, °C (°F) | 43.0–53.0 (109.4–127.4) |
| Ultrasonic Frequency, kHz | 20.0–40.0 |
| Dwell Time in Vapor | 30 sec–2 min, or until condensation ceases |
| Immersion Time | 1–8 min; adjust for soil, geometry, and cleanliness requirement |
| Hoist Speed, m/min (ft/min) | ≤3.4 (11.2); slower withdrawal may reduce solvent carryout |
| Freeboard Ratio, minimum | ≥0.75 (1.00–1.25); preferred for improved vapor containment |
Material Compatibility
| Material | Compatibility |
|---|---|
| Aluminum | Compatible |
| Copper | Compatible |
| Stainless Steel | Compatible |
| Titanium | Compatible |
| Brass | Compatible |
| Tungsten | Compatible |
| Neoprene | Compatible |
| Butyl Rubber | Compatible |
| EPDM | Compatible |
| KYNAR (PVDF) | Compatible |
| Viton A&B | Test for Compatibility |
| Kalrez | Test for Compatibility |
| HDPE | Compatible |
| PTFE | Compatible |
| Nylon | Compatible |
| PVC | Compatible |
| Epoxy | Compatible |
| Phenolic | Compatible |
| ABS | Test for Compatibility |
| Acrylic | Test for Compatibility |
| Polycarbonate | Test for Compatibility |
| Other Metals, Elastomers, Plastics | Test for Compatibility |
Available Sizes
| Package Size (Volume) | Package Size (Net Weight) |
|---|---|
| 55-gallon lined metal drums | 500 lbs |
| 5-gallon lined pails | 50 lbs |
Need Help Selecting
the Right Product?
Our technical team is here to
help you find the best solution.
Related Products
