FluoSolv®
FluoSolv® 7700 High-Temperature Dielectric Heat Transfer Fluid
No reviews yet
Write a Review
Write a Review
FluoSolv®
FluoSolv® 7700 High-Temperature Dielectric Heat Transfer Fluid
High-Temp Thermal Control High 167°C boiling point supports demanding thermal-management applications Low Volatility Very low vapor pressure helps minimize evaporative fluid losses Nonflammable No flash point for…
$100.00
Product Details
High-Temp Thermal Control
High 167°C boiling point supports demanding thermal-management applications
Low Volatility
Very low vapor pressure helps minimize evaporative fluid losses
Nonflammable
No flash point for use in demanding thermal-management environments
Dielectric Performance
High electrical insulation for sensitive electronic and high-voltage systems
Zero Ozone Depletion
Zero ODP with lower GWP than many legacy PFC and PFPE thermal fluids
ABOUT FLUOSOLV® 7700
FluoSolv® 7700 is a high-performance dielectric heat-transfer fluid engineered as a direct, drop-in replacement for 3M™ Novec™ 7700 Engineered Fluid. Designed for higher-temperature thermal-management applications, FluoSolv® 7700 combines a high boiling point, very low volatility, excellent dielectric properties, nonflammability, and thermal stability for reliable heat transfer in demanding electronic and industrial systems.
With a boiling point of 167.0°C (332.6°F) and vapor pressure below 0.10 kPa at 25°C, FluoSolv® 7700 provides significantly reduced evaporation compared with lower-boiling fluorinated heat-transfer fluids. Its dielectric characteristics make it particularly well suited for single-phase electronics cooling, high-temperature semiconductor equipment, power electronics, thermal testing, and other applications requiring precise temperature control around sensitive electrical components.
Contact NuGenTec technical experts for assistance evaluating FluoSolv® 7700 as a replacement for 3M™ Novec™ 7700 in your high-temperature heat-transfer, electronics-cooling, semiconductor, testing, or advanced thermal-management system.
TYPICAL APPLICATIONS
High-Temperature Heat Transfer
Thermal & Reliability Testing
Semiconductor Process Equipment
Power Electronics Cooling
Single-Phase Electronics Cooling
High-Temperature Process Control
High-Temp Thermal Control
High 167°C boiling point supports demanding thermal-management applications
Low Volatility
Very low vapor pressure helps minimize evaporative fluid losses
Nonflammable
No flash point for use in demanding thermal-management environments
Dielectric Performance
High electrical insulation for sensitive electronic and high-voltage systems
Zero Ozone Depletion
Zero ODP with lower GWP than many legacy PFC and PFPE thermal fluids
TYPICAL PROPERTIES
| Property | FluoSolv® 7700 |
|---|---|
| Boiling Point, °C (°F) | 167.0 (332.6) |
| Pour Point, °C (°F) | −50.0 (−58.0) |
| Density at 25°C (77°F), g/mL (lb/gal) | 1.797 (15.00) |
| Flash Point, °C (°F) | None |
| Viscosity at 25°C (77°F), mPa·s | 4.54 |
| Vapor Pressure at 25°C (77°F), kPa | <0.10 |
| Thermal Conductivity at 25°C (77°F), W/m·K | 0.062 |
| Specific Heat at 25°C (77°F), kJ/kg·K | 1.04 |
| Heat of Vaporization at B.P., kJ/kg | 83 |
| Dielectric Strength, 0.1-in gap, kV | >25 |
| Dielectric Constant at 1 kHz | 6.7 |
| Volume Resistivity, Ω·cm | 1 × 1011 |
MATERIAL COMPATIBILITY — METALS
| Material | Compatibility |
|---|---|
| Aluminum | Compatible |
| Cast Steel | Compatible |
| Monel | Testing Recommended |
| Brass | Compatible |
| Copper | Compatible |
| Nickel | Compatible |
| Bronze | Testing Recommended |
| Hastelloy | Testing Recommended |
| Stainless Steel | Compatible |
| Carbon Steel | Compatible |
| Inconel | Testing Recommended |
| Tantalum | Testing Recommended |
| Cast Iron | Testing Recommended |
| Incoloy 825 | Testing Recommended |
| Titanium | Testing Recommended |
| Ti6Al4V | Testing Recommended |
| Zinc | Testing Recommended |
| Zinc Plating | Testing Recommended |
| Galvanized Surfaces | Testing Recommended |
| Magnesium | Testing Recommended |
| Other Metals | Testing Recommended |
MATERIAL COMPATIBILITY — GASKETS & POLYMERS
| Material | Compatibility |
|---|---|
| Nitrile / NBR | Testing Recommended |
| Hydrogenated Nitrile / HNBR | Testing Recommended |
| EP / EPDM | Compatible |
| Chloroprene | Testing Recommended |
| Isobutylene / IIR Latex | Testing Recommended |
| Synthetic Isoprene / NR (Natural Rubber) | Testing Recommended |
| Natural Isoprene / NR (Natural Rubber) | Testing Recommended |
| Fluorosilicone | Testing Recommended |
| Fluorocarbon / FKM (Viton) | Testing Recommended |
| Chemraz Kalrez / FFKM | Testing Recommended |
| PTFE / FEP (Teflon) | Compatible |
| Gylon Style 3500, 3504, 3510 | Testing Recommended |
| Nylon / Polyamide | Testing Recommended |
| Polyvinyl Chloride / PVC | Testing Recommended |
| Polyethylene | Compatible |
| Polypropylene | Compatible |
| Epoxy | Compatible |
| Graphite | Compatible |
| Other Gaskets & Polymers | Testing Recommended |
AVAILABLE SIZES
| Package Size | Net Weight |
|---|---|
| 55-gallon lined metal drums | 550 lb |
| 5-gallon lined pails | 52.5 lb |
NEED HELP SELECTING THE RIGHT PRODUCT?
Our technical team is here to help you find the best solution.
Contact an Expert
Related Products
FluoSolv®
FluoSolv® 7000 Low-Temperature Dielectric Heat Transfer Fluid
Precision Thermal Control
$100.00
