New
ElectroPolish
ElectroPolish EP-PSCI Stainless Steel, Titanium & Nitinol Electropolishing Solution
No reviews yet
Write a Review
Write a Review
ElectroPolish
ElectroPolish EP-PSCI Stainless Steel, Titanium & Nitinol Electropolishing Solution
Precision Electropolishing Levels microscopic surface irregularities Specialty-Alloy Performance For stainless, titanium and Nitinol Smoother, Brighter Surfaces Reduces burrs and surface roughness Controlled Proces…
$100.00
Product Details
Stainless Steel Electropolishing
Titanium Surface Finishing
Precision Micro-Deburring
Nitinol & Specialty-Alloy Finishing
Machined & Fabricated Components
Surface Leveling & Brightening
Need Help Selecting
Precision Electropolishing
Levels microscopic surface irregularities
Specialty-Alloy Performance
For stainless, titanium and Nitinol
Smoother, Brighter Surfaces
Reduces burrs and surface roughness
Controlled Process Strength
Balanced for intermediate-strength polishing
High-Conductivity Acid Bath
Supports efficient electrochemical metal removal
About ElectroPolish EP-PSCI
ElectroPolish EP-PSCI is a high-performance electropolishing solution engineered for stainless steels, titanium, Nitinol and related specialty alloys. The electrochemical process selectively removes microscopic high points from the metal surface, producing a smoother, more uniform finish without the mechanical deformation associated with grinding or conventional polishing.
EP-PSCI is designed for precision surface leveling, micro- and macro-deburring, brightening and refinement of complex metal components. Controlled removal of the outer surface layer can reduce roughness, improve cleanliness and enhance the finished appearance of precision parts while preserving intricate component geometries.
Within the NuGenTec electropolishing family, EP-PSCI provides an intermediate level of process aggressiveness—more aggressive than EP-PCI and less aggressive than EP-316—providing additional flexibility when selecting chemistry for alloy composition, surface condition and desired material-removal rate.
Typical Applications
Stainless Steel Electropolishing Titanium Surface Finishing Precision Micro-Deburring Nitinol & Specialty-Alloy Finishing Machined & Fabricated Components Surface Leveling & Brightening
Precision Electropolishing
Levels microscopic surface irregularities
Specialty-Alloy Performance
For stainless, titanium and Nitinol
Smoother, Brighter Surfaces
Reduces burrs and surface roughness
Controlled Process Strength
Balanced for intermediate-strength polishing
High-Conductivity Acid Bath
Supports efficient electrochemical metal removal
Typical Properties
| Property | ElectroPolish EP-PSCI |
|---|---|
| Appearance | Green Solution |
| Chemical Function | Acidic Electropolishing Electrolyte |
| Density at 20°C (68°F), g/ml (lb/gal) | 1.726 (14.40) |
| pH, 100.0% | <1.00 |
| Dynamic Viscosity at 20°C (68°F), mPa·s | 1 |
| Boiling Point, °C (°F) | 100.0 (212.0) |
| Flash Point, °C (°F) | >200.0 (>392.0) |
| Solubility in Water, g/L | Fully Miscible |
| Volatile Organic Compounds (VOC), g/L | 0 |
| Corrosive | Yes |
Process Parameters
| Parameter | Typical Operating Range |
|---|---|
| Use Concentration, % (v/v) | 100 |
| Operating Temperature, °C (°F) | 4.4–93.3 (40.0–200.0) |
| Pre-Clean | Alkaline clean, followed by DI water rinse |
| Water-Removal Step | Suggested to prevent water drag-in |
| Electrical Conditions | Application specific; high conductivity supports lower current and voltage |
| Post-Treatment | DI water rinse; optional passivation followed by DI rinse |
Material Compatibility
| Material | Compatibility |
|---|---|
| Aluminum | Test for Compatibility |
| Cast Steel | Test for Compatibility |
| Monel | Test for Compatibility |
| Brass | Test for Compatibility |
| Copper | Test for Compatibility |
| Nickel | Test for Compatibility |
| Bronze | Test for Compatibility |
| Hastelloy | Test for Compatibility |
| Stainless Steel | Compatible |
| Carbon Steel | Test for Compatibility |
| Inconel | Test for Compatibility |
| Tantalum | Test for Compatibility |
| Cast Iron | Test for Compatibility |
| Incoloy 825 | Test for Compatibility |
| Titanium | Compatible |
| Ti6Al4V | Compatible |
| Zinc | Test for Compatibility |
| Zinc Plating | Test for Compatibility |
| Galvanized Surfaces | Test for Compatibility |
| Magnesium | Test for Compatibility |
| Other Metals | Test for Compatibility |
Available Sizes
| Package Size | Net Weight |
|---|---|
| 275-gallon tote | 3,961 lb |
| 55-gallon drum | 793 lb |
| 5-gallon pail | 72.0 lb |
Need Help Selecting
the Right Product?
Our technical team is here to
help you find the best solution.
Related Products
ElectroPolish EP-PSCI
Specifications: Primary Application: electro-polishing general industries less aggressive than EP-316 pH: 1.2 Chrome: 0.06 Iron: 0.1 Sizing: 55-Gal NFPA: 3, 0, 1, corrosive ElectroPolish EP-PSCI:...
$100.00
ElectroPolish
ElectroPolish EP-SS Stainless Steel & Specialty Alloy Electropolishing Solution
PrecisionElectropolish
$100.00
ElectroPolish
ElectroPolish EP-PCI Brass Electropolishing & Deburring Solution
Precision Electropolishing
$100.00
ElectroPolish EP-PCI
Specifications: Primary Application: electro-polishing general industries, less aggressive than EP PSCI pH: 1.2 Chrome: 0.06 Iron: 0.1 Sizing: 55-Gal NFPA: 3, 0, 1, corrosive ElectroPolish EP-PSCI:...
$100.00
ElectroPolish EP-SS
Specifications: Primary Application: electro-polishing general industries less aggressive than EP-PCI pH: 1.2 Chrome: 0 Iron: 0 Sizing: 55-Gal NFPA: 3, 0, 1, corrosive ElectroPolish EP-SS: Electro...
$100.00