NuSolv™ SOR Silicone Oil & Adhesive Remover

Specifications:

• Primary Application: Silicone Oil Remover Flammable
• Flash Point (C): -4
• pH: n/a
• Boiling Point (C): 101
• VOC: (g/L): 818
• NFPA: 1,3,0
  
  

NuSolv/NuWet SOR Series of Products is Patent Pending

NuSolv™ SOR A non-toxic mixture of solvents used to remove silicone oils & adhesives, cured and uncured silicone conformal coatings, fluxes, pastes, organics, and greases.

Description:

NuGeneration Technologies’ NuSolv SOR is a non-toxic mixture of solvents used to remove both silicone oils & adhesives, silicone conformal coatings, fluxes, pastes, organic residues, and greases from a multitude of surfaces, including conformal coating application nozzles. NuSolv SOR is effective in removing silicone soils in fewer than two minutes when used at ambient temperatures - a job that takes other solvent mixtures upwards of 45 minutes to remove.

Performance Characteristics of NuSolv SOR

NuSolv SOR was formulated to be used at both ambient temperatures for cold-cleaning applications as well as at elevated temperatures for vapor phase cleaning. NuSolv SOR contains a mixture of solvents, allowing for effective removal of a wide variety of soils and coatings. NuSolv SOR contains no toxic solvents, making it the intelligent choice for worker safety, and the environment. Traditional silicone oil and adhesive removal solutions require a mixture of halogenated solvents and extreme low or high pH additives to “activate” the solution and break siloxane bonds. This aggressive approach can easily damage part components and discolor surfaces. NuSolv SOR will not harm part components or surfaces and works through dissolution. NuSolv SOR is an effective and cost competitive replacement for Dow Corning “Dowsil” OS-10 when used in cleaning applications.

Directions for Use

NuSolv SOR is used at 100% concentration and is effective at ambient temperatures in cold cleaning applications. However, it can also be used in immersion and wipedown applications for 5 seconds to 5 minutes. The parameters can vary due to the type and extent of soils to be removed.

Benefits of NuGenTec NuSolv SOR

• Non-toxic environmentally friendly solvent blend
• Effective at ambient temperatures for cold-cleaning applications, or at elevated temperatures for vapor phase cleaning
• High soil loading
• Works fast
• No rinsing required

Contact Us for Fast, Effective Silicone Oil & Adhesive Removers

NuGenTec’s NuSolv SOR is the proven solution for fast, effective, and environmentally safe silicone oil and adhesive removal. Contact us today to learn more about NuSolv SOR or any of our specialty chemicals and cleaners.

Features

To the best of our knowledge, this product is California Prop 65 compliant.

NuSolv™ SOR Non-toxic mixture of solvents used to remove silicone oils & adhesives, cured and uncured silicone conformal coatings, fluxes, pastes, organics, and greases. NuSolv SOR is an effective, and cost competitive replacement for Dow Corning “Dowsil” OS-10 when used in cleaning applications.