NuSolv™ SOR-C Silicone Oil & Adhesive Remover

Specifications:

• Primary Application: Silicone Oil Remover Non-flammable
• Patent Pending: YES
• Flash Point (C): 62
• pH: n/a
• Boiling Point (C): 171
• VOC: (g/L): 752
• NFPA: 1,2,0

NuSolv/NuWet SOR Series of Products is Patent Pending

Description

NuGenTec’s NuSolv™ SOR-C is a Non-Flammable, non-toxic, azeotropic mixture of solvents used to remove both silicone oils & adhesives, uncured silicone conformal coatings, fluxes, pastes, organic residues, and greases from a multitude of surfaces, including conformal coating application nozzles.
NuSolv SOR-C is effective in removing silicone soils in fewer than two minutes when used at ambient temperatures - a job that takes other solvent mixtures upwards of 45 minutes to remove.

Performance Characteristics of NuSolv SOR-C

NuSolv SOR-C was formulated to be used at both ambient temperatures for cold-cleaning applications as well as at elevated temperatures. NuSolv SOR-C contains a mixture of solvents, allowing for effective removal of a wide variety of soils and coatings. NuSolv SOR-C contains no toxic solvents, making it the intelligent choice for worker safety. Traditional silicone oil and adhesive removal solutions require a mixture of halogenated solvents and extreme low or high pH additives to “activate” the solution and break siloxane bonds. This aggressive approach can easily damage part components and discolor surfaces. NuSolv SOR-C will not harm part components or surfaces and works through swelling and dissolution. NuSolv SOR-C is an effective and cost competitive replacement for Dow Corning “Dowsil” OS-30 and OS-50 when used in cleaning applications.

Directions for Use

NuSolv SOR-C is used at 100% concentration. It is highly effective at ambient temperatures in cold cleaning applications and can also be used at temperatures up to 55°C (131°F) for five seconds to five minutes for heated cleaning with no combustibility concerns. Parameters may vary based on the type and extent of soils to be removed.

Benefits of NuSolv SOR-C

• Nontoxic, azeotropic, versatile solvent blend
• Effective at ambient temperatures for cold-cleaning and at elevated temps for more rapid cleaning
• An effective replacement for Dow Corning "Dowsil" OS-30 & OS-50

Contact Us for Fast, Effective Silicone Oil & Adhesive Removers

NuSolv SOR-C is the Non-Flammable, non-toxic solution you need for fast and effective silicone oil, adhesive, and contaminant removal. Contact us today to learn more about NuSolv SOR-C or any of our other specialty chemicals and cleaners.

Features

To the best of our knowledge, this product is California Prop 65 compliant.

NuSolv™ SOR-C Silicone Oil & Adhesive Remover. An effective, and cost competitive replacement for Dow Corning “Dowsil” OS-30 and OS-50. This is a non-flammable alternative to typical flammable solvent options for cleaning.