FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Fluid
FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Fluid
FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Fluid
FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Fluid

FluoSolv®

FluoSolv® NC-786 Non-Chlorinated Vapor Degreasing Fluid

No reviews yet Write a Review
SKU:
FX-786

Specifications: FluoSolv® NC-786 Composition (Typical) Fluorinated Fluid Mixture > 85 wt% Cyclopentane Proprietary IPA Proprietary Water < 100 ppm Non-volatile residue <100 ppm (drums) , <200 ppm (pails)…

$100.00
Adding to cart… The item has been added
Product Details

Specifications:

FluoSolv® NC-786 Composition (Typical)

  • Fluorinated Fluid Mixture > 85 wt%
  • Cyclopentane Proprietary
  • IPA Proprietary
  • Water < 100 ppm
  • Non-volatile residue <100 ppm (drums) , <200 ppm (pails)
  • Appearance Clear, colorless

Download TDS:

Download (m)SDS:

Non-Chlorinated Vapor Degreasing Fluid Details

FluoSolv® NC-786 is an azeotropic blend of a proprietary fluorinated fluid mixture, cyclopentane and isopropyl alcohol. It is intended for precision degreasing applications for removal of particulates, fingerprints and light oils. A key attribute of this azeotropic blend is that it does not contain any chlorinated solvents making it desirable in applications and certain geographic locations where use of 1, 2 trans-dichloroethylene is not permissible.

FluoSolv® NC-786 is a drop-in replacement for AK-225, Vertrel® MCA and other solvents that are used for precision vapor-degreasing, defluxing, particulate removal and cleaning fingerprints.

FluoSolv® NC-786 has an ideal balance of solvency & physical properties such as high density, low surface tension and low viscosity to clean metal surfaces in the shortest amount of time.

Vertrel is a registered trademark of the DuPont company


FluoSolv® NC-786 Benefits

NuGenTec FluoSolv® NC-786 is ideally balanced to deliver performance, worker safety, and desirable environmental properties.

  • Non-ozone depleting chemical (ODC)
  • Drop-in replacement for AK-225
  • Low global warming potential (GWP)
  • Low toxicity; high allowable exposure limit (AEL);
  • Non-chlorinated & high chemical stability


Material Compatibility

FluoSolv® NC-786 is compatible with all metals, ceramic and other non-conducting materials. Most elastomeric materials are compatible except fluoroelastomers such as Viton & Kalrez which tend to swell. It is recommended that all materials be tested prior to use.

  Compatible Additional Testing Required
Metals Aluminum, Copper, S/S, Titanium, Brass, Tungsten —
Elastomers Neoprene, Butyl Rubber, EPDM, Kynar (PVDF) Viton A & B, Kalrez**
Plastics HDPE, PTFE, Nylon, PVC, Epoxy, Phenolic Stressed plastic* (Acrylic, ABS)

**Viton & Kalrez are fluoroelastomers that tend to swell when exposed to fluorinated fluids; dimensional changes are reversible
*Acrylics & ABS in stressed conditions are more susceptible to solvent attack at elevated temperatures.


Physical Properties

Property NuGenTec FluoSolv® NC - 786 Asahi AK-225 DuPont Vertrel® MCA Honeywell Solstice®
Boiling Point °C [°F] 49[120] 54 [129] 39 [102] 19[66]
Density at 25°C (77°F) kg/liter [lb/gal] 1.149 [9.589] 1.55 [12.9] 1.41 [11.7] 1.27 [10.6]
Surface Tension at 25°C (77°F) dyne/cm 18.5 16.2 21.2 12.7
Viscosity at 25°C (77°F), cPs 0.40 0.59 0.59 0.53
Vapor Pressure at 25°C (77°F) kPa 72 38.5 62 152
Heat of Vaporization @bp cal/g 47.5 35 67.3 45.6
Global Warming Potential 150 370 806 1
Ozone Depleting Chemical No Yes No No
Volatile Organic Compounds (VOC) g/l 287 0 536 0
Allowable Exposure Limit (AEL) ppm 800 100 200 800
Worker Exposure Ceiling (ppm) No No 400a No
KB Value 45 31 50 25

VERTREL is a registered trademark of DuPont Company
a: Has a ceiling of 400 ppm due to its acute toxicity. None of the above solvents have any stipulated ceiling on AEL


Features

To the best of our knowledge, this product is California Prop 65 compliant.


Free Solvent Sample and Vapor Degreaser to Test With:

NuGenTec offers a small loaner vapor degreaser and a loaner 5-gallon pail to assist with your testing. The loaner vapor degreaser plugs into a standard wall outlet and fits on a standard pallet. This allows you to test our FluoSolv® solvent in your own controlled environment without immediately changing the solvent in your current equipment.

For more information about testing our FluoSolv® NC-786, please call us at 800-409-3142 or Contact Us.

Email: FluoSolv@nugentec.com

 

Shipping & Returns
Icon Loading