Ethylene Glycol

No reviews yet Write a Review

Efficient Heat Transfer Excellent thermal performance for industrial heating and cooling systems Lower Viscosity Lower viscosity than comparable propylene glycol solutions for improved pumpability Long Service Life I…

$100.00
Product Details

Efficient Heat Transfer

Excellent thermal performance for industrial heating and cooling systems

Lower Viscosity

Lower viscosity than comparable propylene glycol solutions for improved pumpability

Long Service Life

Inhibitor package helps maintain pH stability and protect system components

Corrosion Protection

Inhibited for protection of common metals in properly maintained systems

Proven Technology

Widely used for industrial HVAC, refrigeration and process heat transfer

About Ethylene Glycol

NuGenTec inhibited Ethylene Glycol is a high-performance glycol-based heat-transfer fluid designed for closed-loop heating, cooling, refrigeration, HVAC, and industrial process applications. When blended with deionized water at the appropriate concentration, ethylene glycol provides reliable freeze and burst protection while maintaining excellent heat-transfer performance and lower viscosity than comparable propylene glycol solutions.

The fluid is formulated with corrosion inhibitors to help protect common system metals and maintain stable performance throughout extended service. Ethylene glycol/water concentration can be selected based on the required freeze protection, operating temperature, and thermal-performance requirements, allowing the fluid to be optimized for applications ranging from HVAC and process cooling to industrial refrigeration, ice rinks, snow-melt systems, and other closed-loop thermal-management systems.

Contact NuGenTec technical experts for assistance selecting the appropriate ethylene glycol concentration and evaluating compatibility, freeze protection, and thermal performance for your heat-transfer system.

Typical Applications

Closed-Loop Heat Transfer
Data Center Secondary Cooling
Refrigeration & Freeze Protection
HVAC & Chilled-Water Systems
Industrial Process Cooling & Heating
Process Temperature Control

Efficient Heat Transfer

Excellent thermal performance for industrial heating and cooling systems

Lower Viscosity

Lower viscosity than comparable propylene glycol solutions for improved pumpability

Long Service Life

Inhibitor package helps maintain pH stability and protect system components

Corrosion Protection

Inhibited for protection of common metals in properly maintained systems

Proven Technology

Widely used for industrial HVAC, refrigeration and process heat transfer

Typical Properties

Property Ethylene Glycol
Boiling Point, °C (°F) Concentration dependent, typically 100.0 to 158.3 (212.0 to 317.0)
Freezing Point, °C (°F) Concentration dependent, typically −51.1 to 0.0 (−60.0 to 32.0)
Density at 20°C (68°F), g/ml (lb/gal) Concentration dependent, typically 1.000–1.127 (8.35–9.40)
pH, 100% 8.00–9.00
Flash Point, °C (°F) 120.5 (249.0), concentrate
Viscosity at 20°C (68°F), mPa·s Concentration dependent, typically 3.9–16.6
Vapor Pressure at 20°C (68°F), psia Concentration dependent, typically 0.237–0.315
Thermal Conductivity at 20°C (68°F), W/m·K Concentration dependent, typically 0.331–0.457
Specific Heat at 20°C (68°F), kJ/kg·K Concentration dependent, typically 2.922–3.743
Operating Temperature Range, °C (°F) Concentration dependent, typically −51.0 to 121.0 (−59.8 to 249.8)
Volatile Organic Compounds (VOC), g/L Concentration dependent
Acceptable Exposure Limit (AEL), ppm 50 ppm (OSHA)

Material Compatibility: Metals

Material Compatibility
Aluminum* Compatible, Contact Technical Expert
Cast Steel Compatible
Monel Compatible
Brass Compatible
Copper Compatible
Nickel Compatible
Bronze Compatible
Hastelloy Compatible
Stainless Steel Compatible
Carbon Steel Compatible
Inconel Compatible
Tantalum Compatible
Cast Iron Compatible
Incoloy 825 Compatible
Titanium Compatible
Ti6Al4V Compatible
Zinc** Incompatible, Contact Technical Expert
Zinc Plating** Incompatible, Contact Technical Expert
Galvanized Surfaces** Incompatible, Contact Technical Expert
Magnesium** Incompatible, Contact Technical Expert
Other Metals Testing Recommended

Material Compatibility: Gaskets & Polymers

Material Compatibility
Nitrile / NBR Excellent to 65.6°C (150.0°F), Good Above 65.6°C (150.0°F)
Hydrogenated Nitrile / HNBR Excellent
EP, EPDM Excellent
Chloropropene Fair
Isobutylene / IIR Latex Good
Synthetic Isoprene / NR (Natural Rubber) Good / Excellent
Natural Isoprene / NR (Natural Rubber) Good / Excellent
Fluorosilicone Contact Technical Expert
Fluorocarbon / FKM (Viton) Good to 37.8°C (100.0°F), Poor Above 37.8°C (100.0°F)
Chemraz Kalrez / FFKM Excellent
PTFE / FEP (Teflon) Excellent
Gylon Stylve 3500, 3504, 3510 Excellent
Nylon / Polyamide Fair
Polyvinyl Chloride / PVC Fair
Polyethylene Excellent
Polypropylene Excellent
Epoxy Good / Excellent
Graphite Excellent
Other Gaskets & Polymers Testing Recommended

Available Sizes

Package Size Net Weight
275-gallon plastic totes 2,587 lbs
55-gallon plastic drums 518 lbs
5-gallon plastic pails 47.0 lbs

Need Help Selecting the Right Product?

Our technical team is here to help you find the best solution.

Contact an Expert

Not Sure If Ethylene Glycol Is Right for Your Application?

Contact an Expert