FluoSolv® Eleven-X

Download TDS:

• FluoSolv-Eleven-X-TDS.pdf

Download MSDS:

• FluoSolv-Eleven-X-US-EN-1-sds.pdf

High-Performance Cold Cleaning Solvent - Injection Molding

High-performance cleaning solvent ideal for use in injection mold cleaning on hot, inline press cleaning or cold, offline press cleaning. Fast evaporating, non-flammable, high-solvency, residue-free, and non-carcinogenic - ideal replacement for n-propyl bromide (nPB), methylene chloride (DCM), trichloroethylene (TCE) and perchloroethylene (PERC).

Introduction

NuGeneration Technologies’ FluoSolv® Eleven-X was developed as a drop-in replacement for nPB, TCE and PERC cold-cleaning applications. As these solvents are being banned for environmental, health and safety reasons, a suitable alternative that meets the desirable properties of fast-evaporation, non-flammability, high-solvency and improved worker health and safety is more needed than ever. After two years of careful development and testing, FluoSolv® Eleven-X was created to be able to meet of these criteria. FluoSolv® Eleven-X is a powerful cleaner, and ideal for injection molding cleaning both inline and offline, on hot or cold molds where perfect cleaning and limited down time is absolutely crucial.

Characteristics

FluoSolv® Eleven-X was formulated to be used at both ambient temperatures for cold-cleaning/wipe applications as well as at elevated temperatures up to 47 °C (117 °F). FluoSolv® Eleven-X is not listed on the IARC’s Monographs as “Carcinogenic”, or “Possibly Carcinogenic” like nPB, DCM, TCE and PERC. With a Kb value of 111, FluoSolv® Eleven-X has incredible solvency, making it a suitable drop-in replacement for nPB, DCM, TCE and PERC. FluoSolv® Eleven-X is 2000x less toxic than nPB, 20x less toxic than TCE, and 8x less toxic than PERC, and 4x less toxic than DCM according to the ACGIH.

Directions for Use

FluoSolv® Eleven-X is used at 100% concentration, and is effective at ambient temperatures in cold cleaning and wipe applications. However, it can also be used up to 47 °C (117 °F) for improved cleaning. The parameters can vary due to the type and extent of soils to be removed.

Product Benefits

• High-performance, non-flammable, low toxicity solvent blend
• Removes all polycarbonate, ABS and other plastics, degraded resins, gas deposits, greases, dirt and moisture from injection molds
• Non-flammable - safe in hot, inline wipedowns between injection shots

Physical Properties

Property Comparison

Worker Safety

Please make sure you have read and understand the product label and SDS before using this product. Avoid breathing vapors, spray or mists. Use only with adequate ventilation. Wash thoroughly after handling. Observe label precautions.

Storage

Keep out of direct sunlight. Keep from freezing. Store between 40 °F - 120 °F.

Features

To the best of our knowledge, this product is California Prop 65 compliant.