FluoSolv® 72DA
FluoSolv® 72DA
FluoSolv® 72DA
FluoSolv® 72DA

FluoSolv®

FluoSolv® 72DA

No reviews yet Write a Review
SKU:
FluoSolv-72DA

Download TDS: FluoSolv® 72DA-TDS Download MSDS: FluoSolv® 72DA-US-EN-2025-sds Introduction FluoSolv® 72DA is an azeotropic blend of hydrofluoroether methyl nonafluorobutyl ether, ethyl nonafluorobutyl eth…

$100.00
Adding to cart… The item has been added
Product Details

Download TDS:


Download MSDS:


Introduction

FluoSolv® 72DA is an azeotropic blend of hydrofluoroether methyl nonafluorobutyl ether, ethyl nonafluorobutyl ether, trans-1, 2-dichloroethylene and isopropanol. This mixture of azeotropic components has been found to be consistent through most applications.

FluoSolv® 72DA has been created for electronic applications, as well as other precision cleaning jobs. It was generated to replace harmful HFC’s, CFC’s, HCFC’s, nPB, and other chlorinated solvents.


Applications

NuGenTec FluoSolv® 72DA is recommended in arenas tending to vapor degreasing, and immersion cleaning. Further:

  • Cleaning, rinsing and drying agents
  • Cleaning of rosin solder flux residues, oils, greases, and waxes.


Material Compatibility

FluoSolv® 72DA is compatible with all metals, ceramic and other non-conducting materials. Most elastomeric materials are compatible except fluoroelastomers such as Viton & Kalrez which tend to swell. It is recommended that all materials be tested prior to use.

  Compatible
Metals Aluminum, Copper, Stainless Steel, Titanium, Tungsten
Elastomers Neoprene, Butyl Rubber, EPDM, Kynar (PVDF)
Plastics HDPE, PTFE, Nylon, PVC Epoxy, Phenolic


Additional testing required for plastics such as ABS, Acrylic, Polycarbonate and fluoroelastomers (Viton A & B & others)


Physical Properties

Property NuGenTec FluoSolv® 72DA AK-225 Freon® TE
Boiling Point °C [°F] 44 52 45
Density at 25°C (77°F) 1.27 g/mL 1.49 1.50
Surface Tension at 25°C (77°F) dyne/cm 18 16.8 17.7
Viscosity at 25°C (77°F), cPs 0.40 0.61 0.65
Vapor Pressure at 25°C (77°F) kPa 360 414 362
Global Warming Potential 43 400 5800
Ozone Depleting Chemical 0 0.03 0.77
Volatile Organic Compounds (VOC) 889 g/L Exempt -
KB Value 58 41 40

 

Features

To the best of our knowledge, this product is California Prop 65 compliant.


Storage, Packaging & Availability

FluoSolv® 72DA is thermally & chemically a very stable solvent. It is non-reactive, has low water solubility and will not oxidize or degrade when exposed to air or sunlight. Common industrial practice should be implemented for storage; keep away from human food source and extreme temperature conditions. Freezing temperatures will cause the drums to compress and hot conditions will balloon the drum. The product in any case is perfectly usable.

FluoSolv® 72DA is available in three package sizes

  • 55-gal phenolic lined metal drums
  • 5-gal phenolic lined pails
  • 1-gal HDPE plastic bottles

For more information about testing our FluoSolv® 72DA, please call us at 800-409-3142 or Contact Us.

Email: FluoSolv@nugentec.com

Shipping & Returns
Icon Loading