FluoSolv® 7200DL

Download TDS:

• FluoSolv® 7200DL-3M-Novec-7200DL-Replacement-Fluid-TDS

Download MSDS:

• FluoSolv® FluoSolv-7200DL-US-EN-2025-sds

Introduction

FluoSolv® 7200DL is a high-purity hydrofluoroether (HFE) clear, colorless fluid, developed to directly replace 3M™ Novec™ 7200DL. It is manufactured with tightly controlled impurity levels—ions, metals, particulates, and non-volatile residue—to meet stringent requirements in electronics manufacturing, particularly for lubricant deposition on hard disk drives and precision cleaning of head gimbal assemblies. The fluid is non-flammable, non-conductive,
VOC-exempt (U.S.), zero-ODP, thermally stable, and exhibits low toxicity.

Key Features & Benefits

Ultra-high purity: ≥99% ethoxy-nonafluorobutane, ≤1 ppm non-volatile residue (NVR), with strict control over ions, metals, and particulates

High performance solvent: low surface tension (~13.6 dynes/cm) ensures excellent wetting and penetration in microfeatures

Safe & environmentally sound: non-flammable, VOC-exempt, zero ozone depletion, low GWP (~55), and very short atmospheric lifetime (~0.77 years)

Low toxicity: “practically non-toxic”; recommended 8-hour exposure guideline of 200 ppm

Broad compatibility: compatible with most metals, plastics, and elastomers used in electronics manufacturing

Applications

FluoSolv® 7200DL is ideally suited for:

• Lubricant and additive deposition onto hard disk media
• Precision cleaning in head gimbal assembly
• Applications requiring ultra-high purity solvents in electronics and medical industries

Material Compatibility

FluoSolv® 7200DL is compatible with a broad range of materials:

• Metals: Aluminum, Copper, carbon steel, stainless steel, brass, Molybdenum, Tantalum, Tungsten, Cu-Be alloy, Mg alloy AZ32B
• Plastics: PMMA (acrylic), polyethylene, polypropylene, polycarbonate, epoxy, PET, ABS, polyester
• Elastomers: butyl rubber (best for long-term use), natural rubber, EPDM, EPR; note PTFE and silicone rubber may swell over extended exposure

Physical Properties

Features

To the best of our knowledge, this product is California Prop 65 compliant.

Free Solvent Sample and Vapor Degreaser for Testing

NuGenTec offers a small loaner vapor degreaser and a loaner 5-gallon pail to assist with your testing. The loaner vapor degreaser plugs into a standard wall outlet and fits on a standard pallet. This allows you to test our FluoSolv® solvent in your own controlled environment without immediately changing the solvent in your current equipment.

FluoSolv® 7200DL is available for purchase in three package sizes:

• 55-gal phenolic lined metal drums
• 5-gal phenolic lined pails
• 1-gal HDPE plastic bottles

For more information about testing our FluoSolv® 7200DL, please call us at 800-409-3142 or Contact Us.

Email: FluoSolv@nugentec.com