AquaKlean® RP700 | In-Process Rust Protection | Water Based
Specifications:
|
- To the best of our knowledge, this product is California Prop 65 compliant.
Cleaner and Rust Inhibitor - In-Process
Non-nitrated, silicate-free liquid cleaner/rust inhibitor for use on ferrous and non-ferrous metals including Copper/Copper alloys, Aluminum and Zinc.
Description:
NuGeneration Technologies’ AquaKlean® RP700 is a non-nitrated, non-caustic, silicate-free liquid cleaner/rust inhibitor. RP700 cleans and leaves a dry film to protect metals from rust during indoor storage in one easy step. Protection typically lasts for up to 3 months depending upon conditions. Our amine-free formula and inhibitor package makes AquaKlean RP700 highly compatible with copper and copper alloys.
Characteristics:
AquaKlean RP700 was formulated to provide improved rust/flash rust protection after an in-process cleaning step that removes many shop soils and oils. AquaKlean RP700 is specially formulated to be used in multi-metal applications such as ferrous metals; non-ferrous metals including copper and copper alloys, aluminum, and zinc; rubber gaskets and PVC.
Directions for Use:
AquaKlean RP700 is applied by either spray or immersion. Coatings can be heat-treated and, if desired, can be easily removed with a mild cleaner. AquaKlean RP700 should be run at 3 – 10% by volume of water at 70 – 160°F for 15 seconds to 3 minutes depending upon the application.
Product Benefits:
- Multi-metal cleaner and rust inhibitor
- Biodegradable and non-foaming
- Non-nitrated, non-caustic and silicate-free
- Excellent oil splitting capability for recirculating systems
Physical Properties |
|
Use concentration (spray or immersion) |
3 - 10% by volume |
Bulk Density |
8.5 lbs/gal |
Operating Temps |
70 °F to 160 °F |
pH, Concentrate |
10.5 - 11.0 |
pH, @5% |
10.3 - 10.8 |
VOC (Concentrate) |
62 g/L |
Flash Point |
None |
Chelates |
No |
Soluble in water |
Complete |
Biodegradable |
Yes |
Corrosive |
No |